Introducing 1P, 3P & 5P: Powder Metal Materials Optimized at Last.

Posted by Horizon Technology - June 05, 2018

header-picture

Powder metal does more than you might think -- if you’ve got the right material. Knowing the strengths and subtleties of each material process can make your product stand out in a competitive market.

Three emerging material processes you should know about ASAP are the 1P, 3P, and 5P soft magnetic composites. These terms refer to not only how your vendor processes the parts, but also how it fabricates the material. When you consider 1P, 3P, or 5P for your application, you’re looking at both the raw material itself and the process that allows you to impart certain qualities for better performance

(DYK? The “P” stands for “process.”)

So, what can each material do? And which will most benefit your application?

Soft Magnetic Powder Metal’s Performance Options

Picking one of these material processes is a bit like calling tech support (but much less stressful). Ideally, you start with 1P as a baseline. If your part needs a little more help with its performance, we send you up to level 2 tech support (or in this case, 3P). If that’s still not enough, it’s time to try 5P.

Soft magnetic composite performance is influenced by the powder used, the part’s density, and post-pressing heat treatment. The type of powder used influences the magnetic performance of your part.

Heat Treatment Matters

Heat treatment largely defines the 1P, 3P, and 5P processing alternatives. It helps give the metal impressive magnetic and mechanical strength.

Here’s how we define each material process, including the heat treating involved:

1P

1P means you press the part and process it in a single fashion -- strictly in an air atmosphere. 1P processing is designed to improve mechanical strength of your component.

Note that despite the name, 1P is still heat treated too. At Horizon, we treat 1P at a maximum temperature of about 500°C. This processing method provides a maximum permeability of about 550.

The 1P soft magnetic composite series is considered the most economical baseline option.

3P

3P means we press your material as before, but take things a bit further.

With 3P we compact your powder, then add a magnetic oxide coating to the particles.

These extra two steps promote higher permeability (up to 700 or even more) with outstanding mechanical strength. The temperature in step two is below the annealing temperature of iron, so losses are reduced relative to the 1P process, but still not fully optimized ...

5P

A 5P soft magnetic composite is created in a slightly higher-temperature atmosphere containing nitrogen.

The first step in this state-of-the-art process is identical to that of 1P’s and 3P’s. The following step, however, is performed at a temperature that causes your compacted iron powder to anneal.

The benefit of this unique processing? The lowest losses of the three, with permeabilities up to 700 and frequencies up to 1,000 Hz possible.

Warning: 5P is the most expensive of these three options.

What About Your Project?

Soft magnetic composite creates one-of-a-kind shape-making ability -- whether it’s 1P, 3P, or 5P. In turn, that ability gives you:

  • Cost savings
  • Optimal performance
  • Compact design

You’re probably wondering by now which would best fit your project.

Which powder and processing is best for your parts depends on the magnetic performance and mechanical strength required.

1P

The unique characteristics of this material fulfill the requirements of many parts. Here are some examples:

  • Ignition coil in automobiles -- the very first soft magnetic composite part!)
  • Electric motors -- co-axials, unique motor shapes not requiring high strength
  • Solenoids -- electrical devices with a simple in/out function (think your car door lock or a brake gear to stop rotary motion)

3P

If moderate losses and high strength are what you need, then 3P is best for you.

Uses for 3P are similar to those of 1P except that you’re looking for higher strength or slightly higher magnetic performance.

Certain solenoids are classic 3P examples. Why? A solenoid has a given response time. But higher magnetic performance will shorten that response time. So a higher-performing solenoid will stop it faster. Surely you can think of practical uses for that speed!

Certain kinds of motors are great matches for 3P, too. Specifically, you want a higher strength in certain motors so they don’t break. Improved long-term durability is key when you have a part that’s consistently slamming against something else.

5P

These are perfect for applications with medium-high frequency and where heat generation is critical.

Topping that list would be high-performance, high-efficiency, low-loss motors. Think of a brushless D/C (BLDC) electric motor. The traditional way of handling these is to use a high-end silicon steel (aka electrical steel) laminate.

Why? These motors tend to have higher operating frequencies. This is where the average lamination steel isn’t enough, so traditionalists move on to silicon steels. But 5P gives you the same benefits of a high-performing silicon steel laminate, but with the added shape-making ability of soft magnetic composites.

Soft Magnetic Composites Are Shaping the Future

There’s little info out there yet on 1P, 3P, and 5P material methods, so we get it if your head is spinning. And auto and other industries catch on to the unique efficiencies of these soft magnetic materials, that’ll change.

With so little education out there, it’s best to discuss your specific needs with a powder metal parts vendor to optimize performance and cost. An experienced expert will be able to explain the nuances in material differences and 3-D part shaping. This helping hand can be especially important to those new to leveraging the 3-D shape-making capabilities of soft magnetics.

Horizon Technology is one of only four suppliers in North America that use 1P, 3P, and 5P materials. And we get it directly from the material source.

Need more info? We can tell you everything you need to know (and then some) about these materials are used and processed. Consulting with Horizon can guide you to the proper grade for your application. Talk to us about your next design dreams!

REQUEST a Quote From Horizon >

Topics: Materials


Recent Posts

Soft Magnetic Composite FAQs

read more

When Is Soft Magnetic Composite NOT Ideal for Powder Metal Components?

read more

Machining Powder Metal Parts: Rarely Necessary, Usually a Pain

read more